Accessories

Here you can find our extensive range of accessories for our data centre solutions.

Items 1 to 10 of 22 total

per page
Page:
  1. 1
  2. 2
  3. 3

List  Grid 

  1. 2 active fans with protective grille and cable set for SP/PX Rack

    2 active fans with protective grille and cable set for SP/PX Rack

    2 separate active fans, incl. protective grill and fixing accessories for SP and PX Racks Learn More
  2. 482.6 mm (19") swing frame, 40 U, for SP and PX

    482.6 mm (19") swing frame, 40 U, for SP and PX

    Swing frames for installing 482.6 mm (19") components over the entire height of 800 mm wide SP Racks/PX Racks provide optimum access from the rear. The frames are installed as retrofit components in the Rack slightly off-centre. With T-handle. Learn More
  3. Anti-toppling plate for IS-1 Rack with rack rollers, 40 mm

    Anti-toppling plate for IS-1 Rack with rack rollers, 40 mm

    A retrofit part to secure the IS-1 Rack mechanically to the floor Learn More
  4. C-profile rails for cabinet width  800 mm (SP and PX Racks)

    C-profile rails for cabinet width 800 mm (SP and PX Racks)

    Cable support rails enable the structured clamping and strain relief of cables routed along the width and depth of the cabinet by means of cable clamps and/or fasteners. The rails are mounted at various depths in the cabinet between the vertical profiles.. Learn More
  5. Castors for IS-1 Rack without plinth, 100 mm

    Castors for IS-1 Rack without plinth, 100 mm

    Castors add mobility to the IS-1 Racks and can be retrofitted to the bottom of the rack Load bearing capacity per castor: 100 kg., max. 300 kg static load capacity per IS-1 Rack. Learn More
  6. Fan tray with 3 fans (inc. fan speed control and temperature display)

    Fan tray with 3 fans (inc. fan speed control and temperature display)

    The fan tray (3 fans) for server and network cabinets serves to circulate the air inside the server or network cabinet, thus improving convection around the cabinet surface. It prevents the formation of hot zones and dissipates the heated air efficiently.

    For all manufacturers!

    Learn More
  7. Fire protection system TITANUS RACK-SENS

    Fire protection system TITANUS RACK-SENS

    Space-optimised fire protection for server cabinets: Data processing, server or switchgear cabinets are among the most important technical equipment in any company. They are responsible for managing internal data flow or controlling manufacturing processes and yet, more often than not, these cabinets are positioned inaccessibly or are insufficiently integrated into existing security systems. The new TITANUS RACK-SENS® can put an end to this situation. Learn More
  8. Hinged cover panel for 800 mm wide SP Racks (42 U)

    Hinged cover panel for 800 mm wide SP Racks (42 U)

    The hinged panels cover the cable compartments on the left and right and can be swung open if required. Installation is only possible with 482.6 mm (19") mounting angles, which are installed by means of upper and lower cross supports - order no. 6943000. Learn More
  9. IS-1 rack door, vertically divided with single pane safety glass, 600 x 2000 mm

    IS-1 rack door, vertically divided with single pane safety glass, 600 x 2000 mm

    Vertical double wing steel doors with 3 mm single pane safety glass. The doors can be mounted at the front or rear of the cabinet and are equipped as standard with pivoted handles and security locks. The latter can be replaced by profile half cylinders on request. Learn More
  10. IS-1 rack door, vertically divided with single pane safety glass, 800 x 2000 mm

    IS-1 rack door, vertically divided with single pane safety glass, 800 x 2000 mm

    Vertical double wing steel doors with 3 mm single pane safety glass. The doors can be mounted at the front or rear of the cabinet and are equipped as standard with pivoted handles and security locks. The latter can be replaced by profile half cylinders on request. Learn More

Items 1 to 10 of 22 total

per page
Page:
  1. 1
  2. 2
  3. 3

List  Grid 

SCHÄFER IT-Systems
SCHÄFER Ausstattungs-Systeme GmbH
Pfannenbergstraße 1
D-57290 Neunkirchen

Sales and production:
Industriestraße 41
D-57518 Betzdorf
tel.: +49 (0) 2741/283-770
fax: +49 (0) 2741/283-798
sales@schaefer-it-systems.de