Rack & Room Monitoring
Permanent monitoring of all relevant data

The ever-increasing demands of IT require continuous measurement of all relevant parameters. A wide range of sensors for rack monitoring and room monitoring enables seamless detection and evaluation of conditions in data centers. Thresholds and alarm values can be individually adjusted to the requirements of IT and infrastructure.

This ensures that alarms and critical condition changes are detected and displayed during ongoing operation.

Updates can be found in the media library under software & firmware updates.

Portfolio

Monitoring of business-critical areas
Temperature monitoring
Door opening monitoring
Monitoring of water leakage and ingress
Water leakage cable
Smoke and fire detectors
Vibration sensors for shock detection
Humidity sensors
Passive infrared motion detectors
Open architecture for integration of third-party systems

Possibilities

RMS 442, 842+
RMS extension unit
RMS 64DI unit
RMS dry output
RMS temp. probe
RMS humidity probe
RMS door probe
RMS leak probe
RMS leak cable probe

Download

Please select

Brochure Monitoring

Datasheet iQdata RMS 442

Datasheet iQdata RMS 842+

Manual RMS

Contact

+49 2741 283-770 sales@schaefer-it-systems.de

Rack Monitoring

Trust in our technology

The use of rack monitoring technology ensures efficient and secure management of IT infrastructures. By continuously monitoring the racks, administrators can ensure that all components operate optimally and potential problems are detected at an early stage.

Key features include temperature control and the monitoring of humidity, airflow, and power supply. Overheating or unsuitable environmental conditions can lead to failures or even permanent damage to expensive hardware components. Likewise, an unstable power supply can result in data loss and system crashes.

In addition, rack monitoring enhances the physical security of equipment. Sensors and surveillance cameras help prevent unauthorized access and thus protect the integrity of data. Malfunctions or security incidents are reported immediately, enabling timely response.

iQdata systems for Rack & Room Monitoring provide numerous options for data collection and evaluation – covering operating conditions both inside and outside each individual rack. Take advantage of SCHÄFER IT-Systems’ high-tech solutions to ensure the functionality and security of your IT infrastructure.

Growing Challenges

Systems must be scalable

Data center operators are facing increasing challenges as the demand for IT services rises significantly. Technological progress makes it essential to also develop scalable solutions for rack monitoring.

The Rack Monitoring Systems (RMS) from SCHÄFER IT-Systems meet these requirements. With various device sizes, from RMS 44 up to RMS 842+, they can be individually adapted to the size of the on-site IT infrastructure at any time.

We not only offer a wide range of sensors that enable monitoring, documentation, and evaluation of conditions inside and outside the racks. With these, alarms and critical changes in status can also be displayed immediately during ongoing operations.

The integration of other product areas, such as intelligent power distribution units or electronic door locking systems, into the rack monitoring solution is also easily possible.

Whether for individual racks or entire rack rows, SCHÄFER’s complete RMS portfolio offers the right solution for every size.

Find out more about all our products in our IT monitoring brochure.

Using Information to Optimize Processes

Rack monitoring should not only serve functionality and security in the data center. The data collected from monitoring can also be used to gain new insights that help optimize processes across the entire data center.
Here is an overview of further advantages:

Facilitating Maintenance

By monitoring temperature, humidity, and power consumption, trends and patterns can be identified that may indicate potential issues. Early intervention can prevent failures and extend the lifespan of the hardware.

Increasing Energy Efficiency

Analyzing energy consumption data helps identify inefficient devices and, if necessary, replace them with more energy-efficient models. Optimizing cooling systems based on temperature data can also lead to significant energy savings.

Load Distribution and Capacity Planning

Data on server utilization and network capacities enables better load distribution, improving performance and preventing overloads. This also makes it easier to plan future capacity expansions.

Security Management

Surveillance cameras and access sensors help identify unauthorized access and strengthen security measures. By logging all access attempts, it is possible to investigate whether someone has tried to gain entry without authorization – from the entire data center down to individual racks.

Plan Expansions Early

Regular reports and analyses from rack monitoring provide valuable insights into the performance and condition of IT systems. This information supports strategic planning and decision-making, from replacing individual components to expanding the entire data center.

Rack Monitoring

Leverage all data from rack monitoring to increase performance, ensure reliability, minimize energy consumption, and sustainably reduce costs. Rack monitoring with iQdata products from SCHÄFER IT-Systems provides you with the foundation to achieve this!

What are the advantages of rack monitoring?

Rack monitoring increases the functionality and security of the IT infrastructure. It helps prevent failures and extends the service life of the hardware.

Which parameters are monitored during rack monitoring?

Temperature, humidity, and power consumption are continuously monitored. These parameters help to identify potential problems at an early stage.

How does IT monitoring support process optimization?

The collected data provides insights for improving energy efficiency and load distribution. It also supports strategic planning and decision-making.

Modern data centre