Power supply strip, "D" model, 9 outlets

Quick Overview

Depending on the model, the power supply strips can be installed in the 482.6 mm (19") angle or either vertically or horizontally on 25 mm pitch pattern of the framework.
The plugging direction can be varied by turning the end of the strip by 90°. The Schuko receptacles are integrated into the strip at an angle of less than 35°, allowing the use of angled plugs. The strip's low installation height of only 1 U minimises the loss of space on the 482.6 mm (19") angle.
Similar to photo

Similar to photo

Additional Information

material Aluminium extrusion profile, plastic, in acc. with UL94 V0
finish light grey RAL 7035
scope of delivery 1 power supply strip with a 2 m lead (3 x 1.5 mm²) and Schuko plug depending on the model, fixing accessories
technical data depending on the model:
  • design in acc. with DIN 49440 and CEE F/III, Operating voltage 240V
  • overvoltage protector tested in acc. with DIN VDE 0675, part 6/A1/A2 requirement class D, Uoc varistor temperature monitoring, visual operation monitoring, nominal current capacity per conductor 6.5 kA, deflector voltage 250V/50 Hz
  • 10A noise suppression filter in acc. with DIN VDE 0565, part 3/5.86
  • transient protection
RS = rocker switch OP/NF = overvoltage protector and noise suppression filter, transient protection

SCHÄFER Ausstattungssysteme GmbH
Pfannenbergstraße 1
D-57290 Neunkirchen

Sales and production:
Industriestraße 41
D-57518 Betzdorf
tel.: +49 (0) 2741/283-770
fax: +49 (0) 2741/283-798