Get advice now
IS-1 Edge Rack

IS-1 Edge Rack
Single cabinet solution up to 10 kW

Compact single-cabinet solution based on the proven IS-1 enclosure system for small decentralised solutions. Reliable climate control provided by a Slot-InCooler. Separation of cold/warm zones. 25 or 30 usable height units, plus four vertical U in each cover panel. Power supply for the entire system through compact 19" power distributor (Powerbox) with 5 U. Rack extinguishing system and access control inclusive. Rack monitoring system: monitoring of all important parameters (temperature, humidity, vibrations, door monitoring, fault messages from UPS, cooling and fire alarm/extinguishing system), fail-safe power supply via UPS.


  • UPS provides fail-safe power supply for the cooling system
  • Power supply: 2 PDUs (1 x UPS-supported, 1 x normal mains) each with 16 x C13 and 2 x C19 outlets
  • Compact 19" UPS with 15 minutes autonomy time: 3-phase on input side, 1-phase on output side, manual bypass for repair and maintenance purposes integrated in Powerbox

Technical data

  • Depth: 1.200 mm
  • Width: 800 mm
  • High: 2,000/2,200 mm
  • Front glazed door, single and double wing versions available
  • Solid door at rear, single and double wing versions available
  • Solid plinth, 100 mm or 200 mm (200 mm suitable for accommodating cooling piping)
  • Rating: IP54