iQdata IS-1 server rack
The flexible interior fittings of the server cabinets, combined with accessibility from all sides and stationary or mobile use, are examples of the wide range of possible combinations.
The flexible interior fittings of the server cabinets, combined with accessibility from all sides and stationary or mobile use, are examples of the wide range of possible combinations.
Regardless of whether it is a small or large data centre, the server hardware must be housed securely. With numerous complex computing tasks, it may be the case that the IT technology produces excessive heat under heavy load. Professionally equipped server cabinets such as the iQData IS-1 server rack from SCHÄFER IT-Systems specialise in providing IT hardware with the optimum conditions for its work.
The hardware may overheat. The consequences are performance losses or even complete hardware failures in this context. Server cabinets require a suitable cooling infrastructure.
Dust, dirt and other impurities can easily get into the hardware and impair its performance. Here too, failures can be one of the more serious consequences.
If the lockable server cabinet is missing, the hardware is more susceptible to theft, vandalism or accidental damage.
Cable management quickly becomes chaotic if there are no server cabinets. Troubleshooting and maintenance become considerably more difficult and time-consuming.
The aforementioned risks increase the likelihood of unplanned downtime in unprotected environments. This may affect business continuity and therefore be very damaging to the company.
It is more difficult to expand or adapt the IT infrastructure as required if there is no centralised management system such as a server cabinet.
Server and network cabinets are more different from each other than you might initially think. It depends on the hardware that is to be installed in it in order to achieve more efficient performance. Server cabinets are, as the name suggests, more suitable for computer components. These include, for example:
Network cabinets are mainly used to organise network components within them. Switches, routers and patch panels, for example, are included. Components like these do not perform complex calculations like servers. Therefore, the hardware inside such cabinets does not get as warm as a running server. Cooling does not play such a prominent role in cabinets for the network.
The situation is different for server cabinets. Cooling plays a central role here. Servers and similar hardware can reach high temperatures during use. If the cooling system of the server cabinets is not sufficiently expanded, this may lead to crashes or even failures.
Server cabinets are therefore much more complex in design than the cabinets that are designed for the expansion of a network. If you only want to set up one network, the network cabinet (19 inches) is the better option. However, if you want to carry out complex calculations, you need the server cabinet. Of course, network components can also be accommodated in the server cabinets alongside the servers.
The first question is what size your server cabinet should be. What height, width and depth is suitable?
The depth and height of the server cabinets are much more important than the width. The deeper 19-inch cabinets have to be, the more technical add-ons and cabling can be accommodated without disrupting the function of the hardware. Typical server cabinets operate with a depth range between 900 mm and 1200 mm. In a few special projects, it may even be up to 1400 mm.
Depending on the equipment selected, your desired server cabinet should have a certain depth. Our service team will be happy to advise you on the right size for your needs.
Much more important, however, are the height units (HUs) of 44.45 mm each. They not only indicate how high your server cabinet and network cabinet will be with the 19-inch specification, but also how much IT technology can be accommodated in it. Depending on your requirements, the height should be selected precisely so as not to leave any resources unused.
The IS-1 server cabinet from SCHÄFER IT-Systems is available ventilated and non-ventilated in 25, 38, 43 and 47 HUs. We would like to use a few examples to give you a rough overview of which amount could be the right one for your requirements.
Ideal for smaller and larger companies whose network sizes are constantly growing.
For small and medium-sized server rooms.
Industry standard for larger networks and data centres.
Where particularly high demands are placed on computing power, e.g: Research and education, telecommunications, media and entertainment industry, colocations of several companies.
If you are not exactly sure about the size of your server cabinets, it is better to choose a larger version. This means that there is definitely enough space to accommodate many servers in the rack and ensure smooth functionality of all active components.
Server cabinets such as the iQdata IS-1 server rack are supplied with protection class IP20. The IS-1 safety cabinets, which fulfil protection class IP54, are also available one level higher. Racks like these have been specially developed by SCHÄFER IT-Systems for use in industry or other demanding environments.
0 Unprotected
1 Protected against solid foreign matter larger than 50 mm (hand)
2 Protected against solid foreign matter larger than 12 mm (finger)
3 Protected against solid foreign matter larger than 2.5 mm (tool)
4 Protected against solid foreign matter larger than 1 mm (wire)
5 Protected against dust
6 Dustproof
0 No water protection
1 Protected against dripping water
2 Protected against dripping water up to an inclination of 15 degrees
3 Protected against water spray up to an inclination of 60 degrees
4 Protected against splash water from all directions
5 Protected against water jets from all directions
6 Protected during temporary flooding
7 Protected when immersed in water
8 Protected during continuous immersion according to manufacturer's instructions
The overall efficiency of your computer hardware can also be customised and improved with a range of add-ons. SCHÄFER IT-Systems offers you a large collection of extensions that you can use to customise server cabinets. The use of monitoring is also no problem with a good foundation.
Our experts are also on hand to help you decide which size and which equipment you need for your requirements. Please do not hesitate to contact us if you have any further questions.
Yes. The vertical profiles of the cabinet are screwed to the welded roof/floor frames. All panelling parts and the interior fittings can be removed.
No. The IS-1 server cabinets are delivered fully assembled and standing on a pallet.
All racks are already fitted with a lock as standard. If required, this can be replaced by a standard 30/10 profile half cylinder in accordance with DIN 18252/EN1303. iQdata Segment Security electronic locking systems can also be used.
The delivery time depends on the type of rack and the quantity. You will be informed of an exact delivery date with your order confirmation.
All IS-1 models are available in protection classes IP20 or optionally IP54.
IP20 and IP54 are protection classes that indicate the suitability for various environmental conditions and the protection of people from danger during use. The first digit indicates the degree of protection against foreign bodies/contacts. The second digit indicates the degree of water protection. There are protection classes from IP00 to IP69K.
IP20 means that the rack is protected against solid foreign bodies larger than 12 mm (e.g. fingers). There is no protection against the ingress of water. A rack with protection class IP54 is protected against the ingress of dust and splash water from all directions.
The IS-1 server rack is specially designed for use in data centres with high heat loads and conditioned air (cooled, no dust in the air). It has perforated doors on both sides for horizontal ventilation. It offers perforated or closed doors depending on the type of cooling architecture selected.
As a commercial customer, you can buy directly from us; as a private individual, you are welcome to contact us and we will then provide details about a wholesaler from your region.
Goods in stock that are ordered by 11:00 a.m. can be delivered the next working day. This service costs €15.00 extra, deliveries up to 10:00 a.m. the next day cost €100.00, up to 12:00 p.m. the next day cost €80.00 extra.
The minimum order value is €100.00. Otherwise, a minimum quantity surcharge of €30.00 will be payable.
Direct delivery to the end customer within Germany is possible at no additional cost. Deliveries abroad must be requested separately. Please get in touch with your personal contact or contact our support team on +49 (0) 2741 283 770.
Yes, delivery to the point of use is possible. We work closely with fixed logistics partners. If required, our support team will provide you with a checklist to be filled out. You will receive an additional cost offer based on the conditions listed there.
Yes, we work closely with regular partners who can carry out professional assembly, linking, alignment and packaging disposal. Talk to your direct contact person or our support team (Tel. +49 (0) 2741 283 770) about planning. They will then clarify all the necessary details with you.
Yes, maintenance contracts can be concluded for the products we supply. Our employees are also available on-site to assist you with the commissioning of various components. Phone +49 (0) 2741 283 770
